Hydraulic motors

Function

- Hydraulic motor designed to convert the energy of the hydraulic fluid into the rotational motion of the output shaft.

- Planetary hydraulic motors are used in hydroficated agricultural (grain and forage harvesters, tractor speed reducers, fertilizer spreaders, seed loaders, sorters, seeders, feed distributors, tillage systems), road construction (bar and drill rigs, skid steer loaders, truck cranes, car lifts, patching machines), communal (combined sweepers, street sweepers, paving machines, sand spreaders, crushers, road sprayers), logging (harvesters), oil producing (hydroplastic fracturing machines) mechanisms, machine tool industry (conveyors of rolling machines, woodworking sawmills, injection molding machines) etc. for the drive of working bodies.

AVALIABLE VERSIONS OF DESIGN OF HYDRAULIC MOTORS

By working volume:

Series D06: 50, 80, 100, 125, 160, 200, 250, 315, 400 и 500 cm3.

Series D07: 80, 100, 125, 160, 200, 250, 315 и 400 cm3.

Series D09: 50, 80, 100, 125, 160, 200, 250, 315, 400 и 500 cm3.

 


 

Depending on the connecting holes sizes:

- with threaded holes for fluid supply G1/2 and drainage hole G1/4 (version not indicated);

- with threaded holes for fluid supply М22х1,5 and drainage hole М14х15,5 (version -01);

- with threaded holes for fluid supply М20х1,5 and drainage hole М14х1,5 (version -02). Other options for connecting holes are allowed in agreement with the consumer.

Depending on the diameter of output shaft:

- D06 with a cylindrical shaft Ф25mm and a parallel key (version not indicated);

- D06 and D07 with a cylindrical shaft Ф32mm and a parallel key (for D07 version not indicated, for D06 indicated number 32);

- D07 with tapered shaft Ф32mm and a parallel key (version indicated with the letter K);

Other options are allowed in agreement with the consumer.

PRINCIPLE OF WORK OF PLANETARY HYDRAULIC MOTORS

Construction of hydraulic motors D06 Construction of hydraulic motors D06.32 Construction of hydraulic motors D07

DESIGN FEATURES
- Reversible non-adjustable hydraulic motors have mounting dimensions that meet international standards and are completely interchangeable with hydraulic motors of other manufacturers.

Compliance with foreign analogues is given in the table

Dozator-plus

Danfoss

 

M+S

Omskhydroprivod

Hidromot

(Luxembourg)

Meta

(Italy)

D06

OMP

MP

MLHP

-

CPM

OP

D07

OMS

MS

MLHS

МГП

CPMS

OS

 

OVERALL AND CONNECTING DIMENSIONS OF HYDRAULIC MOTORS SERIES D06 OVERALL AND CONNECTING DIMENSIONS OF HYDRAULIC MOTORS SERIES D07

 

BASIC TECHNICAL CHARACTERISTICS OF HYDRAULIC MOTORS SERIES D06

BASIC TECHNICAL CHARACTERISTICS OF HYDRAULIC MOTORS SERIES D07

 

LEGEND STRUCTURE OF HYDRAULIC MOTOR ON ORDER

1

2

3

4

5

6

7

8

9

10

DХХ

.

32

.

ХХХ

ХХ

-

ХХ

.

ХХ

where is:

1- Type of hydraulic motor (D06 – disc valves hydraulic motor (gerotor); D07 – spool valves hydraulic motor (geroller);

2- Separator - period;

3- Additional shaft design (32 - Ф32 mm with a key for D06);

4- Separator - period;

5- Working volume, cm3/rev;

6- Hydraulic circuit (without index - with non-return valves; BK - without non-return valves)

7- Separator - hyphen;

8- Connection thread design (without index- G1/2-A lines A и B, G1/4-a line L; 01- М22х1,5-6Н lines А и В, М14х1,5-6Н line L; 02- М20х1,5-6Н lines А и В, М14х1,5 line L);

9- Separator - period;

10- Climatic modification: U1- without an index; HL1 - cold; T1- tropical

English